Going redo the wood and add some more doodads... this will probably go to Matt hex.
Non Electronic Gear
Moderator: Modulators
-
RUBBISH
- Merzbish
- Posts: 3638
- Joined: Fri Nov 22, 2019 9:37 am
- Location: Home
- Has thanked: 761 times
- Been thanked: 752 times
Re: Non Electronic Gear
Another metal milk crate...
Going redo the wood and add some more doodads... this will probably go to Matt hex.
Going redo the wood and add some more doodads... this will probably go to Matt hex.
place holder
-
RUBBISH
- Merzbish
- Posts: 3638
- Joined: Fri Nov 22, 2019 9:37 am
- Location: Home
- Has thanked: 761 times
- Been thanked: 752 times
Re: Non Electronic Gear
Sorry my phone Mic doesn't capture the sound at all properly
Cage and fan with mics and pedals.
With one Mic and one pedal
Debating running straight from my tiny mixer to the p.a. or ruining it out of the little amp to the p.a....
Cage and fan with mics and pedals.
With one Mic and one pedal
Debating running straight from my tiny mixer to the p.a. or ruining it out of the little amp to the p.a....
place holder
-
crochambeau
- Merzwow
- Posts: 599
- Joined: Fri Nov 22, 2019 11:21 am
- Location: Cascadia
- Has thanked: 241 times
- Been thanked: 184 times
- Contact:
Re: Non Electronic Gear
Built a contact mic'd contained surface (I released a toy on it when I played a set last night). Two piezo transducers for source, I stuck a tactile driver driven by a little 20 watt amplifier for return. I realize the amplifier leg classifies as electronic, but getting sound from this does not require power and in a pinch it can perform acoustically.
- Viewed 1226 times
- Viewed 1226 times
-
Indeterminacy
- Merzwowow
- Posts: 843
- Joined: Mon Jan 06, 2020 8:45 am
- Location: B-52D Tail Gunner
- Has thanked: 3 times
- Been thanked: 270 times
Re: Non Electronic Gear
That is quite nice. Double bonus points for the finger jointing.crochambeau wrote: ↑Sun Mar 01, 2020 9:22 am Built a contact mic'd contained surface (I released a toy on it when I played a set last night). Two piezo transducers for source, I stuck a tactile driver driven by a little 20 watt amplifier for return. I realize the amplifier leg classifies as electronic, but getting sound from this does not require power and in a pinch it can perform acoustically.
You are not very far away from a plate reverb system.............
Which you should do.
Image of toy please.
Volume is a fantastic thing,
Power and volume - Pete Townshend
Power and volume - Pete Townshend
-
crochambeau
- Merzwow
- Posts: 599
- Joined: Fri Nov 22, 2019 11:21 am
- Location: Cascadia
- Has thanked: 241 times
- Been thanked: 184 times
- Contact:
Re: Non Electronic Gear
A plate is on my list of things to do. I plan on going big (and not bending the edges). Thanks, the finger joints are quite sloppy on this, I was rushed, and am inspired to build a tablesaw sled to sort future builds that are planned. That said, they are press fit without glue, even though a few fingers suffered poor operator at the saw action.Indeterminacy wrote: ↑Sun Mar 01, 2020 3:01 pm That is quite nice. Double bonus points for the finger jointing.
You are not very far away from a plate reverb system.............
Which you should do.
It was a hexbug, like one of these:
- Viewed 1212 times