Page 1 of 1
PELLE8000 pure data patch
Posted: Sun Jan 19, 2020 6:17 am
by NOISEBOB
Re: PELLE8000 pure data patch
Posted: Sun Jan 19, 2020 9:22 am
by Pigswill
Still playing around with this, but this is fun so far. I'm getting some blips that are reminiscent of the very beginning of
the original System Shock theme
[The extension mp3 has been deactivated and can no longer be displayed.]
How can I get samples to play? At the top of a channel, I set it to "Sample", then towards the bottom, used "LOAD_WAV" to load in a recording (it showed the waveform), then turned up the volume slider. When the sequencer would trigger that channel, it wouldn't play it
Re: PELLE8000 pure data patch
Posted: Sun Jan 19, 2020 10:06 am
by NOISEBOB
Pigswill wrote: ↑Sun Jan 19, 2020 9:22 am
Still playing around with this, but this is fun so far. I'm getting some blips that are reminiscent of the very beginning of
the original System Shock theme
test001.mp3
How can I get samples to play? At the top of a channel, I set it to "Sample", then towards the bottom, used "LOAD_WAV" to load in a recording (it showed the waveform), then turned up the volume slider. When the sequencer would trigger that channel, it wouldn't play it
set the L and R limit and move the play speed and you should get some sound out of it..
Re: PELLE8000 pure data patch
Posted: Mon Jan 20, 2020 2:54 pm
by BPJ
I'll have to pull the generative noise PD patches from my old laptop. A PD compilation would be cool, no MP3s, just files.
Re: PELLE8000 pure data patch
Posted: Tue Jan 21, 2020 1:09 am
by NOISEBOB
I like that idea...
Doesn't pd also have a good streaming internet hook-up thing going on? We could jam together one day...
Re: PELLE8000 pure data patch
Posted: Tue Jan 21, 2020 9:36 am
by BPJ
It does, but I never used it. I used to use Ninjam with Gordon years ago and piss off all the guitar guys wanting to do their best Yngwie Malmsteen impression, it was so much fun.