Isn'tses new noise synth CHERNOBYLIZER !!!!!

Gear Acquisition Syndrome: A tendency to purchase more equipment than justified by usage and/or price.

Moderator: Modulators

Post Reply
User avatar
timdrage
Noise Artist
Posts: 250
Joined: Sat Nov 23, 2019 10:21 am
Has thanked: 2 times
Been thanked: 90 times

Isn'tses new noise synth CHERNOBYLIZER !!!!!

Post by timdrage »

We have released a new noise synth circuit, the Chernobyizer! Been a lot of work getting it finished. Super excited about the noise, still discovering new possibilities. Working on full demos and documentation, more soon, but we do have the first few on sale at https://isntses.etsy.com





Image
Image
Image
Image
The Chernobylizer is a synthesiser designed by Isn'tses (Lisa McKendrick & Tim Drage). This psychogeographic and esoteric custom-built synth contains a world of unique aggressive sounds, including throbbing multi-oscillator pulsewaves, crunchy glitches, bass rumble, harsh noise, 8-bit-esque bleeps, geiger-counter clicks, birdlike tweets and a unique motor-like power-draining effect. Detailed PCB art covers both sides of the board.

The synth is controlled by five knobs and 9 touch-pads. Multiple oscillators interact in deep and mysterious ways, and can be manipulated by an unorthodox resonant pseudo filter and a versatile power-starving section.

A Brief Synopsis:
The Chernobylizer attempts to add to the conversation surrounding the Chernobyl disaster and is an experiment in horror noise. This comes from our own personal interest in Chernobyl and research into the radiation disaster. The silver outline on the front of the PCB represents the decontamination zone and the white outline on the back is the exclusion zone. The four large capacitors represent the four reactors of the Chernobyl plant. The touch pads are mutated forms, mutations caused by radiation. The power starve switch represents the draining of power to reactor 4. If the switch is turned downwards power will slowly drain from the four large capacitors causing the synth to create a sound similar to the reactor losing power followed by a Geiger counter crackle, then to little or no sound as it is fully drained. (note: this is not an on/off switch but if the synth is making no sound it may have fully drained and needs to be turned up). Turning the switch back up will restore power to the circuit in a full-on explosion of sound. This is a rough reenactment of how Reactor 4 exploded. The middle knob controls the wet and dry signal of the filter. All the 5 knobs can be experimented with to create various explosive, loud, crackling noises.

OUTPUTS
The synth has two outputs:
1. The output on the left is an audio output and includes all sounds coming from the synth.
2. The output on the right does not include sounds coming from the filter but includes all other sounds from the oscillators. It is an unfiltered, DC-coupled output which could also act as a gate/trigger signal when connected to other synths or modules. In this way it is compatible with various Eurorack modules and other synths which have CV or input.

NOTE
The Chernobylizer does not have an input.

LED
The LED on the right lights up when the synth is on and the one on the left flickers with the oscillators! We call them the bat eyes.

POWER SUPPLY FOR THE SYNTH - IMPORTANT
The Chernobylizer is powered by any standard BOSS-style 9v centre-negative power supply (not included). Or it can become portable with a centre-negative DC-jack-to-battery-clip adaptor (not included). Using any other power supply may cause the synth to short circuit so please be careful. If you are unsure which power supply to use we have links on our blog to the appropriate one to buy, it can be better to go with a good brand rather than a cheap one which may burn your house down :p. A standard 9v Boss GUITAR pedal power supply should be fine.

IMPORTANT
As this is an open circuitboard synth, take care to avoid placing on a metal/conductive surface while playing or you will short something out! If this does happen don't stress too much as often it only requires a chip replaced.

The Chernobylizer can be played with the Fort Processor which is another synth we have built. The output of the Chernobylizer can go directly into the input of the Fort Processor to get some really explosive or drone sounding noises.

https://www.etsy.com/uk/listing/8776454 ... stom-built?

One of the reasons we love designing stand alone synths is that we really like the portability and versatility of them. Use it as part of your desk set-up with other gear, Eurorack and synths. Also great for outdoor stuff, just plug it into a small speaker and freak out the nature walkers in the forest. The option of having a battery clip and 9v battery makes it very easy to play outdoors, no carrying lots of heavy gear around. Please Note: headphones are not suitable with either of our synths as they require amplification which most headphones don't have.
More making-of documentation and stuff about the ideas behind it is at http://isntses.co.uk/blog
Last edited by timdrage on Fri Dec 18, 2020 12:17 pm, edited 2 times in total.
User avatar
RUBBISH
Merzbish
Posts: 3638
Joined: Fri Nov 22, 2019 9:37 am
Location: Home
Has thanked: 761 times
Been thanked: 752 times

Re: Isn'tses new noise synth CHERNOBYLIZER !!!!!

Post by RUBBISH »

Etsy link doesn't work.


Man that sounds evil.
place holder
User avatar
Pigswill
Noise Artist
Posts: 303
Joined: Mon Dec 23, 2019 9:46 pm
Has thanked: 256 times
Been thanked: 117 times

Re: Isn'tses new noise synth CHERNOBYLIZER !!!!!

Post by Pigswill »

RUBBISH wrote: Tue Dec 15, 2020 7:27 pm Etsy link doesn't work.


Man that sounds evil.
Literally beat me to it by seconds.

Love the sounds!
User avatar
crochambeau
Merzwow
Posts: 599
Joined: Fri Nov 22, 2019 11:21 am
Location: Cascadia
Has thanked: 241 times
Been thanked: 184 times
Contact:

Re: Isn'tses new noise synth CHERNOBYLIZER !!!!!

Post by crochambeau »

That PCB is a work of art, well done!

..and, as everyone has already mentioned,

Code: Select all

https://www.noisewiki.com/forum/isntses.etsy.com
noisewiki is populating the first part of that link. I would suspect a site issue, not a post issue.
When in doubt, add resistance.

http://www.rochambeau.net/
User avatar
timdrage
Noise Artist
Posts: 250
Joined: Sat Nov 23, 2019 10:21 am
Has thanked: 2 times
Been thanked: 90 times

Re: Isn'tses new noise synth CHERNOBYLIZER !!!!!

Post by timdrage »

Thanks all :) Yeah something messed up the link, fixed it + this should work: https://isntses.etsy.com
User avatar
Soloman Tump
Merzwow
Posts: 531
Joined: Mon Dec 23, 2019 5:30 am
Location: Devon, UK
Has thanked: 277 times
Been thanked: 330 times
Contact:

Re: Isn'tses new noise synth CHERNOBYLIZER !!!!!

Post by Soloman Tump »

I want one. It's on my 2021 wish list for when I can
Dismal electronics from Devon
https://intrusivesignals.blogspot.com/ :geek:
User avatar
timdrage
Noise Artist
Posts: 250
Joined: Sat Nov 23, 2019 10:21 am
Has thanked: 2 times
Been thanked: 90 times

Re: Isn'tses new noise synth CHERNOBYLIZER !!!!!

Post by timdrage »

Thanks :)

Here's a quick line-in demo, just scratching the surface of the noise it can make :)

User avatar
timdrage
Noise Artist
Posts: 250
Joined: Sat Nov 23, 2019 10:21 am
Has thanked: 2 times
Been thanked: 90 times

Re: Isn'tses new noise synth CHERNOBYLIZER !!!!!

Post by timdrage »

Took the Chernobylizer & Fort Processor to the local nature reserve / abandoned graveyard yesterday :)

User avatar
timdrage
Noise Artist
Posts: 250
Joined: Sat Nov 23, 2019 10:21 am
Has thanked: 2 times
Been thanked: 90 times

Re: Isn'tses new noise synth CHERNOBYLIZER !!!!!

Post by timdrage »

Restocked the fully pre-built version of the Chernobylizer! https://www.etsy.com/uk/listing/9150096 ... uilt-black

DIY kit version still available too as ever :)

Here's a nice demo a previous customer made:

Post Reply